Coating in XXL

The IPTouch 1.300 CNC coating machine

Fewer and fewer load-bearing timber constructions remain uncoated. And for good reasons: A protective coating not only simplifies the logistical process regardless of the weather and outdoor storage time, but also leaves less dirt behind after assembly, which can usually be easily wiped off. No need for days of sanding after installation. A protective coating is also useful to significantly reduce uneven yellowing and traces of condensation. In addition to suitable glazes, an economical coating option is also required. This is now available - the IPT-1.300.

For material dimensions for 1,300 mm x 400 mm (expandable)
Including mechanization, to take over from your joinery system
Modularly expandable to include sanding and drying
Automatic recognition of component dimensions for maximum ease of use

Bruhn HVT has 4.85 out of 5 stars | 23 reviews on ProvenExpert.com

Get personal advice

Short description IPT-1.300

The IPTouch 1.300 is our latest concept that builds on over 50 years of experience and is the ideal solution for all those who want to rely on sensible automation instead of uneconomical manual work. When is manual work in this area uneconomical? As a rule of thumb, whenever I spend more than €750 per month on employee hours for coating KVH or BSH. Above this amount, we can usually show you economically viable alternatives that are also visually convincing thanks to a much more even application and technically convincing thanks to pre-sanding. Be at the forefront of this development - this will give you a strong competitive advantage!

Technical data

Property	Specification
Editing dimensions	KVH / BSH up to 1,300 x 400 mm
Machine dimensions	from 2.400 - 7.000 mm
Space requirement length	Machine length + 2 times timber length + protection zone of 1 m each
Products	Optimized for water-based

Areas of application

Transparent, transparent and opaque coatings possible
Transport protection for wood - or permanent decorative wood protection
Smooth and profiled wood, even cut-outs can be coated

Convince yourself

Application examples

Frequently asked questions about the IPTouch 1300 CNC coating machine

Can the IPT-1300 coat 100% of all geometries without rework?

Most profiles can be coated fully automatically. However, a small percentage of less common profiles may remain that cannot be automated economically. Our goal is to find the optimal cost-effective solution for you; let's discuss this together.

How long does a color change or cleaning take?

This depends largely on the varnishes used. However, the IPT generally meets all the technical requirements (material selection, accessibility, operating concept) that enable a minimum cleaning time of 20 minutes. Furthermore, you will receive personalized training that leaves nothing to be desired. And that's not all: you will also receive an online course that keeps your employees up-to-date and allows you to quickly train new employees.

Are there also more compact machines?

Yes. The A380 or IPM/IPT380 are also available. These machines already cover a good portion of your daily volume of columns, struts, rafters, etc., and are significantly more cost-effective. Let's discuss which machine best and most economically meets your specific requirements.

What other advantages does the large IPTouch offer?

It pre-sands directly. So, not a calibration sanding like a belt sander, but a pore-opening sanding with lamellae. This ensures a more uniform appearance and better paint adhesion.Then the glaze is pre-dried directly over IR lamps in a continuous process until everything can be packaged just a few minutes later (depending on the color).

What is the current delivery time?

The large IPTouch currently has a lead time of at least 6 months. Its smaller counterparts, such as the A380 and IPM380, are generally in stock. Therefore, if you have larger quantities to coat now and require assistance as soon as possible, we could provide you with a smaller machine as a temporary solution until the larger machine arrives and covers a much wider range of applications.

The DNA of Bruhn Coating Systems

Your advantage is the focus.

"keep it simple" - permanently easy to use.

Plug-and-play solutions for short installation durations.

perfect service - online and offline.

Family owned company - personally there for you.

Your customers are increasingly demanding a finished coated surface for the structural timber supplied. The big players on the market have already reacted and invested in sophisticated coating technology. If you want your own joinery system to have a solid raison d'être in the future, you need to be able to coat. The technology required for this is now far less complex, easy to operate and no longer requires huge investments in robotic coating. For you as a medium-sized company, there is also a high-performance alternative that makes you independent of others and usefully supplements your own production on the joinery system, thus preserving your jobs. We know that your investment goes far beyond the purchase - it is about long-term productivity, environmentally conscious work and the satisfaction of your customers. Rely on our expertise, because we don't just offer systems, but partnerships that are geared towards your success.

Yours sincerely

Certified technical business administrator (IHK)

Excellence in paintwork starts here:

Market leader

... appreciated in our Scandinavian homeland, and increasingly by customers from all over the world

High quality

Precise craftsmanship from our Danish manufactory
German premium electronics for stable processes

Fast

Plug&play: assembly of large lines within a few days
Coating at up to 120 m/min
Express service on site

Economic

Color change from 3 min
Profile change in seconds thanks to CNC programs
Lowest total costs

Innovative

New concepts that you can only get from us
Cooperation with paint manufacturers for market-leading technology

Four proven steps to your
custom-made coating system

1: Needs analysis

We visit you, listen and discuss your current situation and your plans for the future.

2: Concept development

Based on your expectations for the future, we will create a perfectly fitting concept that will inspire you.

3: Your go-ahead

If everything fits and we have tested everything together in the technical center in advance, you place the order with us.

4: Professional implementation

In the end, the on-site installation is extremely fast, our training is at the highest level, and when we leave, your system is up and running.

Request individual advice

What our customers say

Customer testimonials

The DuoFlex spray machine is incredibly effective and I achieve the high quality we expect in Switzerland from start to finish of the batch. It's also an exciting story, especially for the younger employees, because they are better at using touchscreens than their own fingers, and it's easier to get them excited about clean work with a machine than manual work with a mask. The advice from Martin Bruhn was great, the machine is of very high quality. All in all, even better than expected.

Felix R., Zurich
Master carpenter

In May 2020, I purchased a Ceetec DuoFlex flatbed sprayer. Martin Bruhn was my direct contact for the offer, visits to other companies, installation of the machine and also accompanied me after the acceptance test. There was a problem with a Beckhoff motor and the Festool control system. Martin Bruhn/Ceetec rectified both very quickly and without any problems. I can highly recommend Martin Bruhn and the company Ceetec. They work with high-quality components and are also there for you after the invoice has been paid. Unfortunately, I also know other companies. The machine can also be viewed at my premises. Please make an appointment via Martin Bruhn.

Frieder Braun, Managing Director
Braun Fenster GmbH

Our paint suppliers from the industry are just as enthusiastic about the machine as we are. The fascination and enthusiasm for your machine has completely spilled over to us and our employees, and they really enjoy working with it. I was skeptical at first, but you have completely won me over.

Kevin Lembcke, Managing Director,
Holzkontor Kuhlenfeld

Porträt Kevin Lembcke, GF Holzkontor Kuhlenfeld

We have been using Ceetec coaters for over 30 years. Our current IP250, which we have been using for almost 10 years, runs every day and produces flawless quality, which our customers appreciate. The support for questions and replacement parts runs flawlessly via Bruhn, and we receive quick and uncomplicated help when something goes wrong. Machine and service together are exactly the package we need - so full recommendation!

Philipp Harbort, Managing Director,
HOYA Holz

207 satisfied customers speak for themselves. Your satisfaction is our top priority!

Good to know

We have a well-equipped technical center in the Danish factory in 5500 Middelfart. Once we know roughly what you need, we can put it through its paces together. We will be happy to pick you up at the airport (the nearest one is Billund or Copenhagen) and organize everything for you. You can look forward to a successful appointment - we will ensure top results and a Scandinavian feel-good atmosphere in our regular hotel right on the waterfront.

With this in mind, let yourself be pleasantly surprised!

Sincerely,

Yours

Contact form

I would like to book an online consultation appointment directly

Contact information

Bruhn Lackieranlagen
Krumackerfeld 2
D-24997 Wanderup
Branch office: D-71111 Waldenbuch

+ 49 (0) 170 64 50 500
info@bruhn-hvt.de

Coating in XXL

The IPTouch 1.300 CNC coating machine

Short description IPT-1.300